RCF ZM2100 6 Bölge Pre-Amp

RCF ZM2100 6 Bölge Pre-Amp

• Dual-bus system architecture
• System Paging consoles input for up to 6 selective devices daisychained, aux input and overall emergency input on precedence primary bus
• 4 inputs of which 2 microphone and 2 universal, 3 selectable aux inputs with individual volume and tone controls with configurable priority on secondary bus
• Interconnection terminals for power amplifiers to manage primary and secondary buses independently, using 100V single or dual amplifier configuration or 0dB multi-amplifier configuration according to system requirements
• Switches with indicators to send or not the secondary bus program (i.e. music) on each of the 6 output zones
• Link to connect up to eight ZE 2200 6six-zone expansion units so to built-up paging systems in excess of 50 zones.
• Priority indicator to show when any system priority circuit has been triggered
• Selectable chime generator is available on announcements
• GPI and GPO logic ports are available for interface purposes with third parties systems and for monitoring feedback.
• Dedicated wall mounting system remote control allows you to remote the main commands available on the master unit
• RS 232 port for FW upgrade and communication/interface purposes
• Power supply AC or DC24V, 3U 19" rack mounting

• INTERNAL AMPLIFIER TYPE:(no internal amplifier)
• INTERNAL AMPLIFIER MAX. OUTPUT POWER:(no internal amplifier)
• INTERNAL AMPLIFIER OUTPUT VOLTAGE:(no internal amplifier)
• FREQUENCY RESPONSE (+1 / –3 dB):MIC: 60 Hz ÷ 15 kHz AU X: 50 Hz ÷ 20 kHz
• DISTORTION (at max. power):(no internal amplifier)

• MIC input sensitivity:1.5 mV (– 54 dBu)
• MIC input signal / noise ratio:> 60 dB
• MIC input impedance:600 Ω (balanced)
• LINE input sensitivity:200 mV (– 12 dBu)
• LINE input signal / noise ratio:> 70 dB
• LINE input impedance:600 Ω (balanced)
• LINE input signal / noise ratio:> 70 dB
• LINE input impedance:600 Ω (balanced)
• AUX input sensitivity:200 mV (– 12 dBu)
• AUX input signal / noise ratio:> 75 dB
• AUX input impedance:10 kΩ (unbalanced)
• INPUT 1÷4, AUX BASS tone control:100 Hz ± 10 dB
• INPUT 1÷4, AUX TREBLE tone control:10 kHz ± 10 dB
• EMERGENCY input sensitivity:100 mV (balanced audio signal), 100 V line
• EMERGENCY input s/n ratio:> 70 dB
• EMERGENCY input impedance:600 Ω (100 mV balanced audio signal)
• PAGING (RJ 45) input sensitivity:1 V (+ 2 dBu)

• PRE OUT max. output level:1 V
• MOH signal max. output level:1 V (+ 2 dBm @ 600 Ω, balanced)
• MOH amplified output power (8 Ω):1 W (on a 8 Ω load)
• AMPLIFIER 100 V input max. power:240 W

• POWER SUPPLY:115 V / 230 V ac, 24 V
• MAX. POWER CONSUMPTION:100 W
• OPERATING TEMPERATURE:– 10 ÷ + 45 °C (+ 14 ÷ + 113 °F)

• DIMENSIONS (w, h, d):430 x 133 x 365 mm (19" rack, 3 units)
• NET WEIGHT:8.2 Kg